FRESHWATER MAKER – WASTE HEAT TYPE 蒸流法制水
The generators FONTEMAR ® are designed to produce freshwater containing less than 5ppm of TDS, from seawater using waste heat from the main or auxiliary engine cooling water.
Operation is based on a simple distillation principal. Seawater is boiled at low temperature under vacuum to create vapour. This vapour passes through a monel demister, where any droplets of water containing solids are removed, thus only pure vapour will enter into the condenser sea-cooled section. The use of non-ferrous materials, ensures long life and high water quality. The equipments produce 1,500 to 30,000 liters of freshwater per day.
| Model |
Production 24 Hours |
Height (mm) |
Lgth (mm) |
Width (mm) |
Power (kwh) |
Net Weight |
Hot Water |
Sea Water |
Fresh Water |
Unloading Sea Water |
| 60-80 |
1,500 Ltr |
700 |
505 |
340 |
1.85 |
145 kg |
1" |
1" |
3/8 " |
1" |
| TCS 1 |
2,000 Ltr |
1,240 |
815 |
345 |
1.85 |
170 kg |
1" |
1" |
1/2" |
1 1/2" |
| TCS 1,5 |
3,000 Ltr |
1,345 |
830 |
380 |
2.25 |
223 kg |
1 1/2" |
1 1/2" |
1/2" |
2" |
| TCS 2 |
4,000 L |
1,320 |
1,170 |
490 |
2.25 |
260 kg |
1 1/2" |
1 1/2" |
1/2" |
2" |
| 120-160 |
4,000 Ltr |
700 |
1,185 |
370 |
1.85 |
170 kg |
1 1/4" |
1 1/4" |
1/2" |
1 1/2" |
| TCS 2,5 |
5,000 Ltr |
1,320 |
1,370 |
490 |
3.75 |
338 kg |
1 1/2" |
1 1/2" |
1/2" |
2" |
| TCS 3 |
6,000 Ltr |
1,410 |
1,230 |
660 |
6.25 |
390 kg |
2" |
2" |
1/2" |
2 1/2" |
| TCS 4 |
8,000 Ltr |
1,610 |
1,320 |
775 |
6.25 |
560 kg |
2" |
2" |
1/2" |
2 1/2" |
| TCS 5 |
10,000 Ltr |
1,580 |
1,515 |
810 |
6.60 |
750 kg |
2" |
2" |
1/2" |
2 1/2" |
| TCS 6 |
12,000 Ltr |
1,605 |
1,680 |
800 |
8.60 |
850 kg |
2 1/2" |
2 1/2" |
1/2" |
3" |
| TCS 8 |
16,000 Ltr |
1,930 |
1,570 |
910 |
10.00 |
1,110 kg |
4" |
4" |
1/2" |
4" |
| TCS 10 |
20,000 Ltr |
2,060 |
1,565 |
910 |
10.00 |
1,375 kg |
4" |
4" |
1/2" |
4" |
| TCS 12 |
24,000 Ltr |
1,800 |
1,790 |
910 |
12.00 |
1,685 kg |
4" |
4" |
1/2" |
4" |
| TCS 15 |
30,000 Ltr |
1,800 |
2,070 |
910 |
19.00 |
1,800 kg |
4" |
4" |
1/2" |
4" |
FRESHWATER MAKER – Reverse Osmosis Type 逆渗透法制水
The MN 400 series have been specially designed for their installation in ships. MN 400 series are extraordjm inary compact and yet at the same time, they present easy accessibility to each components, thinking in mind of easy accessibility of pieces and simple maintenance.
The materials used for their manufacture as much as the designing are of the highest technological level and that the MN 400 models offers high guarantee of quality.
1) High pressure of triplex ceramic plunger desing whit head manufactured in stainless steel 316 L. The pump
possess an operation silent and with low level of pulsation. Valves and seats in stainless steel 316 L for
maximum durability.
2) Silent blocks for silent running & Pulsation dampener for a very smooth operation.
3) Reverse osmosis spiral wound membranes in polyamide, the most long lasting, easy to clean and sterilize.
4) Electrical contact manometer for high pressure with mechanism in stainless steel 316 L.
5) System will automatically shut off when there is not enough feed water pressure for protecting pumps.
Automatic low quality high TDS Salinometer (salt content). Electro valve with low quality product water
discharge.
6) Totalizing working hour counter. Water counter for registration of the tons of water produced.
7) Pilot lamps for: Booster pump, high pressure pump, high quality product water and low quality product
water. Contactors to 4 VOLTS AC with overload relay for protection of the booster pump and high
pressure pump.
8) Transformer insulation with overload relay for maximum protection. V1 = 220/380 VOLT /
V2 = 12/24 VOLTS. All electric system in robust box manufactured in fiberglass. IP 65.
9) All system mounted of form compact and robust on stainless steel frame for maximum durability.
10)Easy accessibility to all components.
| Model |
Capacity (Day) |
Consumption |
Size (mm) |
Weight (Kg) |
| 400-1 MN |
5,000 Litres |
4.8 kw |
1,170 x 600 x 600 |
|
| 400-2 MN |
7000 Litres |
4.8 kw |
1,170 x 600 x 600 |
|
| 400-3 MN |
8,000 Litres |
4.8 kw |
1,170 x 600 x 600 |
|
| 400-4 MN |
9,000 Litres |
4.8 kw |
1,170 x 600 x 600 |
|
Prefiltration System
1.Heavy duty centrifugal corrosion resistant SS 316 L feed booster pump with 0.8 HP.
2.Valves of chemical cleaning and flushing manufactured totally in stainless steel 316. These valves permit a quick and simple form carry out the operations of flushing and cleaning of the MN unit. It include connection type hose in order to facilitate the maximum the
installation it include hose of flushing and chemical cleaning (2m) with pie valve in order to facilitate the maximum the maintenance of the MN unit.
3. Pre-filter of washable disk of 20 microns for retain sediment of more diameter.
4. Wound Depth cartridge in polypropylene of long duration with great capacity of filtration. Two cartridges: 10 micron and 5 micron housed in their containers and with connections
type hose for their easy installation.
|